Home Miscellaneous How to Hang Peel and Stick Wallpaper by Yourself

How to Hang Peel and Stick Wallpaper by Yourself

0

If you’ve a bare wall you want to cover in a snap, consider peel and stick wallpaper. But before you start applying it read the manufacturer’s instructions and follow these tips.

Your walls need to be clean for the paper to adhere well. So grab a cleaning rag and soapy water.

1. Level the Wall

First, use a level and straightedge to draw a guideline from ceiling to baseboard (or the wall surface you’re covering). It helps to mark this line with a pencil so that you can easily apply the first strip of wallpaper. You may also want to spackle and sand the wall surface to make sure that it’s completely smooth before applying the wallpaper.

Next, remove the faceplates from electrical outlets and light switches to allow for future trimming of the wallpaper around the outlet or switch. Then, take a clean cleaning rag and dampen it with hot water or paper stripper, and wipe down the wall.

Once the wall is clean, pull 12 inches of backing from the bookmarked section of wallpaper and apply it to the wall, starting at the ceiling. Overlap the wallpaper slightly at the top and then trim it so that it sits flush with the ceiling after application. As you work, run a plastic smoothing tool ($8, The Home Depot) over the wallpaper to flatten and smooth it, as well as remove any air bubbles.

2. Remove the Backing

Peel and stick wallpaper is a quick and easy way to add a splash of color or pattern to your walls. While it isn’t quite as forgiving as traditional pasted wallpaper when it comes to shifting and repositioning, with proper prep and care it can be a breeze.

First, make sure the wall is clean and dust free. Many professional installers use a primer such as Zinsser Gardz on walls before hanging wallpaper to help with adhesion and prevent peeling.

Once the wall is ready, remove the faceplates from electrical outlets and light switches and move any furniture out of the way. Measure the height of your wall and buy enough wallpaper to cover it plus extra for mistakes and tricky areas. Next, use a level to create a straight line on the wall as your guideline. Start at the top of the room and begin peeling about 12 inches of backing off from the wallpaper allowing it to stick to the wall along the level line you’ve drawn.

3. Line Up the Pattern

The beauty of this type of wallpaper is that you can line up the pattern with ease. You’ll still want to make sure the wall is clean (peel and stick wallpaper doesn’t adhere well to dirty surfaces) and freshly painted (wait for paint to cure, if necessary). But, unlike traditional wallpaper, you won’t need to use a seam roller or apply wallpaper paste. Get more info on this wallpaper singapore website.

To start, measure the height of your wall and mark it on the floor with a pencil and a straight edge. Then, cut one of your wallpaper pieces to that length.

Start applying the first strip of wallpaper, lining up the pattern as you go. Once you get the hang of it, you’ll be able to do this on each wall in the room. Just be sure to remove the faceplates of your electrical outlets and switches before attempting this project. If you do forget to do this and a piece of wallpaper overlaps an outlet, simply use a flat squeegee or pastry cutter to smooth out the gap.

4. Smooth the Wall

Peel and stick wallpaper is a great alternative to traditional wallcoverings for its ease of application. However, it is important to properly prepare the wall before you start. The walls should be smooth and free of dust or debris, since the self-adhesive wallpaper will adhere best to a clean surface. Additionally, you should remove any faceplates from electrical outlets or light switches so that the wallpaper can be cut to fit around the opening.

To prep your walls, many professionals use a product like Zinsser Gardz to create a slightly tacky surface that works well with most peel and stick wallpapers. You should also apply a coat of primer and allow it to dry completely before applying the wallpaper.

Finally, you should make sure that the room is well-lit so that you can see where your next strip of wallpaper will overlap with the previous one. This will help you avoid mistakes during installation and ensure that the pattern matches up correctly.